HV Sensors
HV-HI-PROBES
sT
HIGH-VOLTAGE-HIGHCURRENT-PROBES for continuous currents from 150 µA to 480 A on potentials up to 1,000V.
Probe-Variations

HV-HI-Probe
High-Current-Probes:

Dimension BF1: 42x16x15 mm (L/B/H)
Dimension BF2: 68x27x15 mm (L/B/H)
Dimension BF3: 90x42x15 mm (L/B/H)

Datasheet
Request

BF1

WordPress Data Table Plugin

Dimension (L/W/H): 42x16x15 mm
Connection of the shunts via copper bar 20x3x200 mm
* specification in each case in the smallest measuring range
** at room temperature (23°)

BF2

WordPress Data Table Plugin

Dimension (L/W/H): 68x27x15 mm
connection of the shunts via copper rail 20x3,5x200 mm
* specification in each case in the smallest measuring range
** at room temperature (23°)

BF3

WordPress Data Table Plugin

Dimension (L/W/H): 84x36x15mm
Connection of the shunt via copper rail 20x3x200mm
* specification in each case in the smallest measuring range
** at room temperature (23°)

HV-HI-PROBES for measuring currents from 150 µA...+10,200 A on potentials up to 1,000V, on the test bench or in the vehicle. Automatic Probe detection.

Features

  • The measuring shunt is mounted directly into the circuit via mounting lugs (BF1 - M6, BF2 & BF3 - M8).
  • For applications up to 480 A continuous current (depending on design)
  • High precision shunt based current measurement for quiescent and operating currents
  • Automatic probe detection (TEDS like)

Version

  • Dimension BF1: 42x16x15 mm (L/B/H)
  • Dimension BF2: 68x27x15 mm (L/B/H)
  • Dimension BF3: 90x42x15 mm (L/B/H)

Construction

  • Measuring resistor in BF1 or BF2 version with mounting lugs (temperature range -40...+130 °C)
  • Memory chip for PROBE identification and calibration data (similar to TEDS)
  • Memory chip for probe identification and calibration data
  • Data cable = L2 (1...5 m) with 8-pin Redel connector

Schaltbild

Please note that the permitted continuous current is smaller than the measuring range.
For more information, please refer to the data sheet.

Application

  • Current measurements in high voltage systems

Scope of Delivery

  • HV-HI-PROBE
  • Factory calibration certificate (DAkkS optional)

Accessories

  • HV-Probe extension cable
  • Battery connection cable set with pole terminals

Coding scheme for order

BF1
- - - -

Name Shunt Value L1 L2 L3
HV-HI-BF1 2/…/0,2 0 1…5 0

BF2
- - - -

Name Shunt Value L1 L2 L3
HV-HI-BF2 2/…/0,035 0 1…5 0

BF3
- - - -

Name Shunt Value L1 L2 L3
HV-HI-BF3 0,05/…/0,025 0 1…5 0
list_weiss
mail_weiss
phone_weiss
cross