LV Sensors

Sensors for low-voltage measurement modules

For precise measurements of power, current, voltage and temperature on consumers or on batteries in low-voltage electrical systems.

Overview

Current measurements with low impedance precision resistors
Voltage measurements
Temperature measurements with PT1000 resistance thermometers, acid-proof on request
Built-in memory module with communication line to the measuring module for reading out configuration data (type, calibration values, serial number, etc.)
High measuring accuracy due to consideration of calibration data in the measured value calculation
No temperature compensation of the measuring resistors necessary due to very low temperature drift
DAkkS calibration on request

LV Power Sensors

HP-PROBE

HP-PROBE for measuring voltages and currents from µA to kA

HP-PROBE for shunt-based measurement of quiescent, operating, and peak currents as well as voltages in low-voltage onboard electrical systems in vehicles or test benches. The measurement shunt resistor is installed directly into the circuit via mounting tabs. Resistance values ranging from µΩ to mΩ. Types BF1 to BF3. Automatic probe identification.

LP-PROBE

LP-PROBE for measuring voltages and currents from nA up to A

LP-PROBE for shunt-based measurement of quiescent, operating, and peak currents as well as voltages in low-voltage onboard electrical systems in vehicles or test benches. Potted measurement shunt resistor with cable outlets and open cable ends for integration into the measurement circuit. Resistance values ranging from mΩ to Ω. Automatic probe identification.

LV Current Sensors

HI-PROBE

HI-PROBE for measuring currents from µA to kA

HI-PROBE for shunt-based measurement of quiescent, operating, and peak currents in low-voltage onboard electrical systems in vehicles or test benches. The measurement shunt resistor is installed directly into the circuit via mounting tabs. Resistance values ranging from µΩ to mΩ. Types BF1 to BF3. Automatic probe identification.

LI-PROBE

LI-PROBE for measuring continuous currents from nA up to A

LI-PROBE for shunt-based measurement of quiescent, operating, and peak currents in low-voltage onboard electrical systems in vehicles or test benches. Potted measurement shunt resistor with cable outlets and open cable ends for integration into the measurement circuit. Resistance values ranging from mΩ to Ω. Automatic probe identification.

LV Dual-Shunt Sensors

KLARI-DUALSHUNT

Low current dual-shunt sensor for high precision current measurement in extremely wide ranges. Continuous currents from 300 nA to 60 A.

Low current dual-shunt sensor for current measurements in extremely wide ranges. Automatic probe detection.

LV Voltage Sensors

U-PROBE

U-PROBE for measuring onboard electrical system or sensor voltages up to 80 V

U-PROBE for measuring voltages from 170 µV up to 80 V in low-voltage onboard electrical systems in vehicles or test benches. Automatic probe identification.

U/U-PROBE

U/U-PROBE for measuring two onboard electrical system or sensor voltages up to 80 V

U/U-PROBE for measuring two voltages from 170 µV up to 80 V in low-voltage onboard electrical systems in vehicles or test benches. Automatic probe identification.

LV Fuse Sensors

FK1/MINI FUSE-PROBE

FK1/MINI fuse sensor for fused current measurements in the fuse box.

FK1/MINI fuse sensor for current measurements in the fuse box with fusing by an FK1/Mini fuse. The FK1/Mini fuse is inserted into the fuse holder in the aluminum housing. Automatic probe detection.

FK2/ATO FUSE-PROBE

FK2/ATO fuse sensor for fused current measurements in the fuse box.

FK2/ATO fuse sensor for current measurements in the fuse box with protection by an FK2/ATO fuse. The FK2/ATO fuse is inserted into the fuse holder in the aluminum housing. Automatic Probe Detection.

FK3/MAXI FUSE-PROBE

FK3/MAXI fuse probe for fused current measurements in the distribution box.

FK3/MAXI fuse probe for current measurements in the fuse box with protection by an FK3/MAXI fuse. The FK3/MAXI fuse is inserted into the fuse holder in the aluminum housing. Automatic sensor detection.

JCASE FUSE-PROBE

JCASE fuse sensor for fused current measurements in the fuse box.

JCASE fuse sensor for current measurements in the fuse box with protection by the original fuse. The JCASE fuse plugs into the fuse holder in the aluminum case. The measuring resistor is integrated in the housing. Automatic probe detection.

MCASE FUSE-PROBE

MCASE fuse sensor for fused current measurements in the fuse box.

MCASE fuse sensor for current measurements in the fuse box with protection by the original fuse. The JCASE fuse is plugged into the fuse holder in the aluminum housing. The measuring resistor is integrated in the housing. Automatic Probe detection.

MICRO2 FUSE-PROBE

MICRO2 fuse sensor for fused current measurements in the fuse box.

MICRO2 fuse sensor for current measurements in the fuse box with protection by a FK1/Mini fuse. The FK1/Mini fuse is inserted into the fuse holder in the aluminum housing. Automatic Probe detection.

MICRO3 FUSE-PROBE

MICRO3 fuse sensor for fused current measurements in the fuse box.

MICRO3 fuse sensor for current measurements in the fuse box with protection by two FK1/ATO fuses. The FK1 fuse is plugged into the fuse holder in the aluminum housing. Automatic Probe detection.

LV Fuse Sensors Slim

FUSE-PROBE SLIM FK1/MINI

FK1/MINI fuse sensor slim in compact design for fused current measurements in the fuse box.

FK1/MINI fuse sensor slim for current measurements in the fuse box. Integrated precision shunt and internal fuse as well as compact dimensions and thin, flexible connection cable. Automatic Probe Identification.

FUSE-PROBE SLIM FK2/ATO

FK2/ATO fuse sensor slim in compact design for fused current measurements in the fuse box.

FK2/ATO fuse sensor slim for current measurements in the fuse box. Integrated precision shunt and internal fuse as well as compact dimensions and thin, flexible connection cable. Automatic Probe Identification.

FUSE-PROBE SLIM FK3/MAXI

FK3/MAXI fuse sensor slim in compact design for fused current measurements in the fuse box.

FUSE-PROBE SLIM FK3/MAXI for current measurements in the fuse box. Integrated precision shunt and internal fuse as well as compact dimensions and thin, flexible connection cable. Automatic Probe Identification.

LV Temperature Sensors

T-PROBE

T-PROBE with PT-1000 sensor for measuring temperatures in low-voltage onboard electrical systems

T-PROBE for temperature measurements using PT-1000 sensors from -40°C to +105°C in low-voltage onboard electrical systems in vehicles or test benches. Automatic probe identification.

Request

info@klaric.de

+49 711 32 777 6-0

Jobs