MULTI-HV UIT ETH - Klaric sichere Hochvolt-Messtechnik

HV Measurement Modules

MULTI-HV UIT ETH

Universal high-voltage measurement module for measuring current, voltage, power and temperature in the vehicle or in the laboratory.

Probe-Variations

Current measurement
High Current Probes: BF1, BF2, BF3-HVI-PROBE
Low Current Probes: HV-LI-PROBE

Voltage measurement
HV-U-PROBE 200V
HV-U-PROBE 1000V

Power measurement
HV-HP-PROBES, HV-LP-PROBES for simultaneous measurement of current and voltage at one input
HV-Breakout-Box

Temperature Measurement
HV-T-Probe (Thermocouple Typ K

For detailed technical information please refer to the data sheet „KLARI-PROBES“

Applications

Datasheet

Request

Form

Measurement Range of Inputs

Measurement Range HV-I-Probe

Measurement Range HV-U-Probe

8-channel high-voltage measurement module with 4 universal probe inputs for current, voltage, power or temperature on potentials up to 1,500 V.

Calculation of work, power, rms values, frequency, power factor, charge, discharge and total balance.

Measurement data output via Ethernet

Features

4 universal inputs - 8 channel
8 kHz sampling rate per channel
1.500 V DC reinforced galvanical isolation
HV test according to DIN EN 61010:2010
Online calculation of power data for DC and AC measurements such as work, power, frequency,
RMS values, power factor
Dynamic sample rate
Autorange Function
Automatic Probe identification (similar to TEDS)
100 Mbit/s Ethernet Interface (100 BASE-TX)
XCP-on-Ethernet (XCP-on-TCP/IP oder XCP-on-UDP/IP)

Version

Accessories

Applications

Power measurement of power electronics
Voltage measurements in the HV electrical systems, HV batteriesTemperature measurement in HV components or batteries

Scope of delivery

Technical data


Inputs	4 Inputs - 8 Channel (2 x ADCs per Input)
Capabilities	Klaric HV-Probes with automatic detection and import of the calibration values Current, Voltage, 2xVoltage, Power, HV Thermocouple Type K, HV PT100/1000 Klaric HV-Breakout Boxes
Resolution	16 Bit ADC with 5 measurement ranges
Sample rate	0,25 Hz to 8 kHz per channel configurable, dynamic sampling speed trigger
Measurement ranges	±9 mV, ±27 mV, ±42 mV, ±210 mV, +1050 / -240 mV 0,3 µV, 0,9 µV, 1,4 µV, 7 µV, 35 µV Resolution
Accuracy	± 0,1 % reading ± 3 Bit of the actual measurement range at 23°C ± 5°C ± 1 % reading ± 3 Bit of the actual measurement range -40°C bis +80°C Measurement Modules + Klari-Probes in a chain
Ethernet	100 MBit/s (100 BASE-TX)
Configuration via	Ethernet
Voltage supply range	7 V - 60 V
Power consumption	typ. 1 W
Temperature range	-40°C to 85°C (-40°F to 185°F)
Calibration	12 months
HV Insulation check	at least 12 months

Request

Jobs