HI-PROBE - Klaric

LV Current Sensors
HI-PROBE

HI-PROBE for measuring currents from µA to kA

Probe-Variations

HI-Probe
High-Current-Probes:

BF1: Dimensons 41.6/17.5/15 mm (L/W/H) – M5 holes
BF1+: Dimensons 53.6/17.5/15 mm (L/W/H) – M5 holes
BF2: Dimensons 68/27.5/14.5 mm (L/W/H) – M8 holes
BF2+: Dimensons 84/27.5/14.5 (mm L/W/H) – M8 holes
BF3: Dimensons 84/57/20.5 mm (L/W/H) – M8 holes

Applications

Stand-alone quiescent current measurement

Mobile measurement technology for quiescent, operating and peak currents

Datasheet

PDF Download

Request

Form


BF1/1+
Resistance [mΩ]	Measuring range [A]	Resolution [mA/Bit]	Max. permanent current [A]
2	-120 / +525	0.150	60
1	-240 / +1,050	0.3	80
0.5	-480 / +2,100	0.6	120
0.2	-1,200 / +5,250	1.5	150

Specification in each case in the smallest measuring range at room temperature (23°C)


BF2
Resistance [mΩ]	Measuring range [A]	Resolution [mA/Bit]	Max. permanent current [A]
2	-120 / +525	0.15	80
1	-240 / +1,050	0.3	120
0.5	-480 / +2,100	0.6	130
0.2	-1,200 / +5,250	1.5	180
0.1	-2,400 / +10,500	3	310

Specification in each case in the smallest measuring range at room temperature (23°C)


BF2+
Resistance [mΩ]	Measuring range [A]	Resolution [mA/Bit]	Max. permanent current [A]
2	-120 / +525	0.15	80
1	-240 / +1.050	0.3	120
0.5	-480 / +2,100	0.6	130
0.2	-1,200 / +5,250	1.5	180
0.1	-2,400 / +10,500	3	310
0.05	-4,800 / +21,000	6	500
0.035	-6,850 / +30,000	9	650

Specification in each case in the smallest measuring range at room temperature (23°C)


BF3
Resistance [mΩ]	Measurement range [A]	Resolution [mA/Bit]	Continuous current [A]
0.020	-12,000 / +52,500	15	1,000
0.005	-48,000 / 210,000	60	2,200

Specification in each case in the smallest measuring range at room temperature (23°C)

HI-PROBE for shunt-based measurement of quiescent, operating, and peak currents in low-voltage onboard electrical systems in vehicles or test benches. The measurement shunt resistor is installed directly into the circuit via mounting tabs. Resistance values ranging from µΩ to mΩ. Types BF1 to BF3. Automatic probe identification.

Features

The measuring shunt is mounted directly into the circuit via mounting lugs
For applications up to 2,200 A continuous current (depending on design)
High precision shunt based current measurement for quiescent and operating currents
Automatic probe detection (TEDS like)

Version

BF1, BF1+, BF2, BF2+, F3

Construction

Measuring resistor with mounting lugs (temperature range -40...+130 °C)
Memory chip for probe identification and calibration data (similar to TEDS)
Data cable = L2 (1...5 m) with 6-pin push-pull connector

Please note that the permitted continuous current is smaller than the measuring range.
For more information, please refer to the data sheet.

Application

Measurement of currents in LV electrical systems

Scope of Delivery

HI-PROBE
Factory calibration certificate (DAkkS optional)

Accessories

LV-Probe extension cable
Battery connection cable set with pole terminals

Coding scheme for order

BF1

Name	Shunt value	L1	L2	L3
HI-BF1	2/…/0,2	0	1…5	0

BF1+

Name	Shunt value	L1	L2	L3
HI-BF1+	2/…/0,2	0	1…5	0

BF2

Name	Shunt value	L1	L2	L3
HI-BF2	2/…/0,035	0	1…5	0

BF2+

Name	Shunt value	L1	L2	L3
HI-BF2+	2/…/0,035	0	1…5	0

BF3

Name	Shunt value	L1	L2	L3
HI-BF3	0,05/…/0,025	0	1…5	0

Request

info@klaric.de

+49 711 32 777 6-0

Jobs