KLARI-FUSE 3 - Klaric

LV Measurement Modules

KLARI-FUSE 3

Universal measurement module for a wide variety of measurement tasks in the vehicle or in the laboratory.

Probe-Variations

Current-Measurement
FUSE-Probe (Micro/ Mini/ ATO/ MAXI/ MCASE/ JCASE)
HI-Probe (BF1/ BF2/ BF3)
LI-Probe

Voltage-Measurement
U-Probe (80 V)

Power-Measurement
HP-Probe
LP-Probe

Temperature-Measurement
T-Probe (Pt100/ Pt1000)

Applications

Mobile measurement technology for quiescent, operating and peak currents

Current measurements of consumers at the fuse box

Datasheet

PDF Download

Request

Form

Measuring ranges of the inputs


Gain	Measuring range [mV]	Resolution [µV/Bit]
100	± 9	0,3
40	± 27	0,9
25	± 42	1,4
5	± 210	7
1	+ 1.050/-240	35

Measuring ranges HI-Probe


HI-Probe
	1 mΩ		200 μΩ
Gain	Measuring range [A]	Resolution [mA/Bit]	Measuring range [A]	Resolution [mA/Bit]
100	± 9	0,3	± 45	1,5
40	± 27	0,9	± 135	4,5
25	± 42	1,4	± 210	7
5	± 210	7	± 1.050	35
1	+ 1.050/-240	35	+ 5.250/-1.200	175

Measuring ranges U-Probes

The table with ID 63 not exists.

16 channel current measurement module with 8 universal probe inputs for current, voltage, power or temperature. Calculation of charge, discharge and total balance. Output via CAN and Ethernet (XCP-on-Ethernet or KlaricServer) possible.

Features

8 universal inputs, 16 channels
8 kHz sampling rate per channel
Dynamic sampling rate
Autorange function
Automatic Probe Identification (TEDS like)
Automatic DBC/A2L generation
Galvanic isolation of all inputs
Online calculation of charge/discharge and total balance (Ah)
100 Mbit/s XCP-on-Ethernet or Klaric server
2 independent 1 MBaud CAN interfaces

Version

Aluminum housing 165/108/42 mm (L/W/H)
Protection class IP65
Temperature range -40°C to +85°C
Power supply 7 V to 60 V DC

Accessories

Klaric LV-Probes
CAN wiring harness with supply
Ethernet harness with/without supply

Applications

Power measurement of power electronics in vehicles or at test benches
Quiescent current measurements
Operating current measurements
Temperature measurements

Scope of Delivery

Measuring module
Factory calibration certificate (DAkkS optional)
A2L/DBC files and documentation

Technical Data


Inputs	8 Inputs 16 Channels (2 x ADC per Input)
Connectivity	Klaric LV probes with automatic detection and acceptance of the calibration values current voltage 2xvoltage combi-I/U PT100/1000
Resolution	16-bit ADC with 5 measuring ranges
Sampling rate	0.25 Hz to 8 kHz per channel configurable, dynamically triggerable via threshold
Measuring ranges	±9 mV, ±27 mV, ±42 mV, ±210 mV, +1050 / -240 mV 0.4 µV, 0.9 µV, 1.4 µV, 7 µV, 35 µV resolution
Measurement accuracy	± 0.1% of the measured value ± 3 bits per measuring range at 23°C ± 5°C ± 1% of the measured value ± 3 bits per measuring range -40°C to +80°C measuring module + Klari -Sample
CAN interface	125k, 250k, 500k, 1000k baud configurable internal CAN termination can be activated via software CAN base ID configurable
Configuration via	USB (virtual COM Port) CAN Ethernet
Power supply	7V - 60V
Power consumption	typ. 2 W
Temperature range	-40°C bis +85°C
Calibration intervals	Recommended every 12 months

Request

info@klaric.de

+49 711 32 777 6-0

Jobs